*Free Shipping to USA on Orders Over $49!*

MTEK FLUX Cover-Gen 4

• Fits the MTEK FLUX Ballistic ,MTEK FLUX Carbon and MTEK FLUX Replica helmets such as the FMA MT
• Agilite accurate fit
• Universal rear cell that fits all common Battery Packs/Counterweights
• Proprietary rear pod provides impact protection for battery packs. 
• Exit holes for all commonly issued NVG Battery box cables/switches
• Next generation lower profile central bungee retention for IR Strobes, cameras etc. 
• Integrated cable management channels
• Full spectrum, rock-solid accessories platform
• Easy installation-can be fitted to helmet in seconds

• Weight: 5oz (143g)
• 1000D Tactical Nylon
• Flat Polyester Mesh 380g/m2
• Laser-engraved polymer bungee channels
• Rear loops for AA and CR123 NVG Batteries
• Made in Israel

This cover fits the following Ops Core Helmets:
• MTEK FLUX Ballistic
• • MTEK FLUX Carbon (Bump)
• FMA MTEK Helmet MTEK Replica)
• This cover is also available for the following additional helmets: • Ops Core FAST MT (also known as “Maritime” or “Super high cut”). Ops Core Fast SF-select from our full helmet covers list here
• If you have any sizing questions or want to request a bulk order for this cover for a different helmet email us at customercare@agilitegear.com

• Free US Shipping on this product (and rest of your order)
• $10 Flat shipping rate to all of Europe on your whole order

U.S Customers Return Policy - If you are not 100% satisfied with your purchase, you can return the product and get a full refund.You can return a product for up to 30 days from the date you received it. Any product you return must be in the same condition you received it in. For any further questions and for info on returns from outside the U.S please contact us at customercare@agilitegear.com

• The Gen4 MTEK Version is a next generation helmet cover that fits the MTEK FLUX helmet like a glove and gives it new, cutting edge functionality and universal accessory management. 
• It employs a new versatile rear flex cell that fi...ts all common NVG battery packs, counterweights and has strategically placed exit holes for all cables. The semi-rigid cell exterior gives rear accessories extra impact protection and has a central loop area for ID patches.
• The Gen 4 helmet cover provides color or camo uniformity, protects the helmet’s painted ballistic surface and serves as a rock solid platform that secures all accessories, preventing loss or damage.

Ranger Green
Coyote Brown
Add to Wishlist

Gen-4 Downrange

Customer Reviews

Based on 3 reviews
Great cover with all the right options, build quality and design

The FLUX COVER-GEN 4 is pure awesome! Installing the cover is very similar to their Bridge, the cover is attached to the helmet on the velcro patches to the side and back along with 5 additional flaps (3 in front/2 at the back) that attaches to the velcro inside the helmet for an all around secure fit... and the fit is tight! The cover is almost flush all the way from back to front and covers almost every shell part of the helmet. The shroud hole might seem a bit too small and cover some of the Wilcox shroud, but I suspect that's to cover the screws to keep them sheltered from the elements.

The cover gives you everything you need and would expect. Velcro and bungee cord to secure your gadgets, cable management slots, counterweight/Nod batt. pack and standard AA/CR123 batt. holders (4 in total).

The velcro is very catchy and keeps your velcro dependent gadgets securely in place. I wouldn't second guess putting my MOHOC camera on one of the side velcro patches, in fact the FLUX cover, gives you more velcro surface than the actual helmet does. I do wish however they didn't make the velcro patch a V shape as it creates a little "deadspace" where I think more could have been useful, but this is probably a design question and keeps the cover more flush following the helmet contours even more.

The middle portion of velcro is usually where you attach the very pricey stuff and with the Bungee cord, you have no risk of losing them. The bungee tabs acts as a center point as well to keep the gadget in place.

The counterweight/NOD batt. compartment at the back is big, or it looks big. The flap has a big velcro surface to add any IR/Morale patch. But the actual compartment is very tight, but not too small for ex. ANVIS batt. packs.
The fabric and mesh combo is great and the whole cover just looks and feels brilliant. You can clearly see that Agilite did a lot of designing and thinking to make this cover one of the best covers for the FLUX Helmet.

Worth The Wait

I have been waiting for someone to release something like this for a while. This helmet cover, once again, proves that Agilite knows what they are doing and that you can trust our Israeli brothers(and sisters) with bringing quality gear to the market. Over all fit is like a glove, the cover Velcro matches the Velcro that comes stock on the helmet, which is awesome due to the pre-thought out original locations including small sections on the brim for IR markers. The cable guides on the ridges of the helmet make routing NVG cabling easy and snag free. The integrated battery/counterweight pouch holds the battery pack secure and protects it, as well as the switch, during use (which most external pouches fail at...). Agilite excels when it comes to small nuances that make a difference, such as the elastic cable blocks which can be used to prevent shifting of things like IR marking devices. Guys at Agilite, once again, you prove that you release quality when it's ready and not until it's ready. Stay Deadly!

Excellent Cover

I absolutely love this cover. The stitching is clean and durable. The fit is awesome, it covers 99% of the helmet even around the rails/shroud. This cant be said of the other commercially available covers. This superior cut means you have to work to get it on correctly, but once it's on it's not going anywhere unless you decide to take it off. The built in bungee is great to retain my S&S Manta IR strobe. The pouch on at the rear of the helmet(bridge) holds my counterweight pouch nice and tight as it has hook Velcro on the inside. It holds flat when not in use to prevent snags and has ample room to store battery packs as designed. The bridge is a great touch as well because no counterbalances are currently (OCT. 2018) are made to specifically be installed on the MTEK that secures into the helmet with more than just velcro on the outside. In all, you are getting the value of more than $150 for $75.